A 400-ton chiller is described by cooling capacity, not by its lifting weight. If your North Carolina equipment is in this capacity range, share the exact rating shown on the nameplate or in an existing equipment schedule when available. A readable label, a general view of the machine and a description of the access route are a practical starting point for a buyer offer.
The 400-ton rating alone does not establish the machine’s size, refrigerant, operating condition or method of removal. Tell the buyer which information is confirmed and which is uncertain. The buyer purchases industrial chillers, handles and pays for recovery, disconnect, crane, rigging, loading and freight, and offers upfront payment. The seller does not need to start or test the unit to begin a conversation.
Start with the equipment identification
A readable nameplate can give a buyer a useful starting point. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. A maintenance record may supply information that is difficult to read. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Separate capacity from lifting weight
Cooling tons should not be confused with shipping weight. When a plate or existing record identifies the rating, share the exact wording or send a photograph. Dimensions, handling weight and the planned exit route are separate questions. Two machines with the same rating may present different access questions. If physical measurements or weight information are unavailable, say so and discuss the next steps with the buyer.
Separate observations from assumptions
A seller can distinguish a known fact from an unverified assumption. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. A short note beside each uncertain detail is enough. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Describe condition without running the unit
An honest condition summary is more useful than a performance claim. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. A gap in the service history does not need to be filled with a guess. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Explain site access and working restrictions
Every site can have its own practical access requirements. Explain where vehicles can enter, who authorizes access and whether a route crosses occupied space. Mention any scheduling restrictions, security procedures or building management requirements that apply to the site. If access details are not settled, identify the person who can clarify them. This information helps the buyer discuss crane, rigging, loading and freight without assuming that all sites are alike.
Describe water-side connections when relevant
If the machine is water-cooled, explain what you know about its water connections. A general picture of the installation can help the buyer understand how the unit relates to the rest of the facility. Mention any equipment that needs to stay in place, and describe uncertainties without trying to disconnect anything. The buyer can discuss the project-specific removal boundary. The buyer handles and pays for the agreed removal work, including disconnect.
Account for elevated or roof-level equipment
For equipment on a roof or elevated platform, describe how the area can be reached. Safe photographs of the surrounding space, nearby obstructions and ground-level access can help establish the situation. Avoid assuming that a particular lift method will be suitable. The buyer handles and pays for the crane and rigging needed for the agreed removal. The plan must reflect the actual site.
Include refrigerant in the removal conversation
The actual refrigerant should be identified from the equipment or reliable records when possible. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. Recovery should be discussed along with the rest of the removal scope. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Understand the buyer-handled removal scope
The equipment purchase includes a discussion of how the machine will leave the site. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller does not have to demonstrate operation. Any site-specific schedule and transaction terms should be agreed before proceeding.
What information supports an offer?
The condition of the chiller is only one part of the conversation. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Estimates should be clearly labeled as estimates. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

