A 700-ton chiller is described by cooling capacity, not by its lifting weight. If your North Carolina equipment is in this capacity range, share the exact rating shown on the nameplate or in an existing equipment schedule when available. A readable label, a general view of the machine and a description of the access route are a practical starting point for a buyer offer.
The 700-ton rating alone does not establish the machine’s size, refrigerant, operating condition or method of removal. Tell the buyer which information is confirmed and which is uncertain. The buyer purchases industrial chillers, handles and pays for recovery, disconnect, crane, rigging, loading and freight, and offers upfront payment. The seller does not need to start or test the unit to begin a conversation.
Start with the equipment identification
A readable nameplate can give a buyer a useful starting point. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. A maintenance record may supply information that is difficult to read. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Separate capacity from lifting weight
A tonnage rating describes cooling capacity, not the weight of the equipment. When a plate or existing record identifies the rating, share the exact wording or send a photograph. Dimensions, handling weight and the planned exit route are separate questions. Two machines with the same rating may present different access questions. If physical measurements or weight information are unavailable, say so and discuss the next steps with the buyer.
Separate observations from assumptions
A seller can distinguish a known fact from an unverified assumption. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. A short note beside each uncertain detail is enough. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Describe condition without running the unit
Describe the equipment’s known condition in ordinary language. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. A gap in the service history does not need to be filled with a guess. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Understand the buyer-handled removal scope
The offer and the removal scope should be considered together. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller is not expected to run or test the machine. Any site-specific schedule and transaction terms should be agreed before proceeding.
Include refrigerant in the removal conversation
Do not infer a chiller’s refrigerant solely from its appearance or brand. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. Flagging the information early helps avoid assumptions during planning. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Account for elevated or roof-level equipment
Tell the buyer if the unit is above ground level or is reached through a restricted area. Safe photographs of the surrounding space, nearby obstructions and ground-level access can help establish the situation. Avoid assuming that a particular lift method will be suitable. Crane and rigging are handled and paid for by the buyer. The plan must reflect the actual site.
Describe water-side connections when relevant
For a water-cooled unit, identify nearby piping and any shared systems. A general picture of the installation can help the buyer understand how the unit relates to the rest of the facility. Mention any equipment that needs to stay in place, and describe uncertainties without trying to disconnect anything. The buyer can discuss the project-specific removal boundary. The buyer handles and pays for the agreed removal work, including disconnect.
Questions to ask before accepting an offer
A few direct questions can make the proposed transaction easier to understand. Ask which machine and related items are included, how upfront payment is arranged, and who handles recovery, disconnect, lifting, loading and transportation. For this buyer, those removal items are handled and paid for by the buyer. Explain any information that remains uncertain. Final arrangements depend on the actual equipment and agreed terms.
What information supports an offer?
A useful offer discussion brings together the equipment and the site. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. If some information is missing, explain what you do know. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

