A 1,200-ton chiller is described by cooling capacity, not by its lifting weight. If your North Carolina equipment is in this capacity range, share the exact rating shown on the nameplate or in an existing equipment schedule when available. A readable label, a general view of the machine and a description of the access route are a practical starting point for a buyer offer.
The 1,200-ton rating alone does not establish the machine’s size, refrigerant, operating condition or method of removal. Tell the buyer which information is confirmed and which is uncertain. The buyer purchases industrial chillers, handles and pays for recovery, disconnect, crane, rigging, loading and freight, and offers upfront payment. The seller does not need to start or test the unit to begin a conversation.
Start with the equipment identification
A useful first step is a clear picture of the manufacturer’s plate. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. A maintenance record may supply information that is difficult to read. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Separate capacity from lifting weight
Cooling tons should not be confused with shipping weight. When a plate or existing record identifies the rating, share the exact wording or send a photograph. Dimensions, handling weight and the planned exit route are separate questions. The capacity figure alone does not describe how a particular unit can be loaded. If physical measurements or weight information are unavailable, say so and discuss the next steps with the buyer.
Separate observations from assumptions
A seller can distinguish a known fact from an unverified assumption. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. Share those distinctions plainly. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Describe condition without running the unit
Describe the equipment’s known condition in ordinary language. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. If you do not know why it stopped, say that plainly. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Coordinate the timing of the sale
A proposed release window is useful even if the exact date is undecided. A replacement, building closure or other work may affect access to the chiller. Identify dependencies and keep them separate from dates that are already approved. It also helps the buyer understand whether the unit is immediately available or part of a later phase. Confirm the actual timing with the buyer; do not assume a fixed turnaround.
Understand the buyer-handled removal scope
The offer and the removal scope should be considered together. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller does not have to demonstrate operation. Any site-specific schedule and transaction terms should be agreed before proceeding.
Include refrigerant in the removal conversation
The actual refrigerant should be identified from the equipment or reliable records when possible. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. Flagging the information early helps avoid assumptions during planning. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Account for elevated or roof-level equipment
For equipment on a roof or elevated platform, describe how the area can be reached. Safe photographs of the surrounding space, nearby obstructions and ground-level access can help establish the situation. Avoid assuming that a particular lift method will be suitable. The buyer pays for crane and rigging as part of the purchase and removal scope. The plan must reflect the actual site.
Prepare for a clear handoff
A clear handoff identifies both the equipment and the site contact. Review the agreed access arrangements, schedule constraints and boundaries of the sale. If any equipment details change, tell the buyer before the planned work. A simple record of open questions helps the right people resolve them. The buyer handles and pays for the agreed recovery, disconnect, crane, rigging, loading and freight.
What information supports an offer?
A buyer needs context about both the machine and its removal. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Unknown details should be identified as unknown. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

