A 900-ton chiller is described by cooling capacity, not by its lifting weight. If your North Carolina equipment is in this capacity range, share the exact rating shown on the nameplate or in an existing equipment schedule when available. A readable label, a general view of the machine and a description of the access route are a practical starting point for a buyer offer.
The 900-ton rating alone does not establish the machine’s size, refrigerant, operating condition or method of removal. Tell the buyer which information is confirmed and which is uncertain. The buyer purchases industrial chillers, handles and pays for recovery, disconnect, crane, rigging, loading and freight, and offers upfront payment. The seller does not need to start or test the unit to begin a conversation.
Start with the equipment identification
Begin by photographing the equipment identification plate. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. A maintenance record may supply information that is difficult to read. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Separate capacity from lifting weight
Cooling tons should not be confused with shipping weight. When a plate or existing record identifies the rating, share the exact wording or send a photograph. Dimensions, handling weight and the planned exit route are separate questions. Two machines with the same rating may present different access questions. If physical measurements or weight information are unavailable, say so and discuss the next steps with the buyer.
Make a simple equipment list
A short inventory is especially useful when several units are involved. List the manufacturer, model and approximate capacity when known, then note the location and condition of each unit. A photograph of each nameplate can be matched to a wider equipment picture. One unit may have records that are unavailable for another. If a detail is uncertain, leave it open. The buyer can discuss the full group or the equipment actually available for sale.
Separate observations from assumptions
Good equipment descriptions make uncertainty visible. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. Explain which information comes from an existing record and which comes from observation. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Describe condition without running the unit
Describe the equipment’s known condition in ordinary language. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. If you do not know why it stopped, say that plainly. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Coordinate the timing of the sale
Tell the buyer about the project schedule as soon as it is known. A replacement, building closure or other work may affect access to the chiller. Identify dependencies and keep them separate from dates that are already approved. A clear schedule gives everyone a better basis for coordinating the scope. Confirm the actual timing with the buyer; do not assume a fixed turnaround.
Include refrigerant in the removal conversation
The actual refrigerant should be identified from the equipment or reliable records when possible. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. Recovery should be discussed along with the rest of the removal scope. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Account for elevated or roof-level equipment
For equipment on a roof or elevated platform, describe how the area can be reached. Safe photographs of the surrounding space, nearby obstructions and ground-level access can help establish the situation. Avoid assuming that a particular lift method will be suitable. The buyer pays for crane and rigging as part of the purchase and removal scope. The plan must reflect the actual site.
Understand the buyer-handled removal scope
Selling an industrial chiller involves both the asset and the practical removal. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller is not expected to run or test the machine. Any site-specific schedule and transaction terms should be agreed before proceeding.
What information supports an offer?
A buyer needs context about both the machine and its removal. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. If some information is missing, explain what you do know. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

