This page concerns selling a chiller associated with R-513A in North Carolina, not selling refrigerant as a separate product. The actual refrigerant must be identified from the particular unit or its records when possible; do not assume the charge from a manufacturer name or the appearance of the machine. The buyer handles and pays for refrigerant recovery as part of the equipment purchase and removal.
A clear photograph of the equipment label can help establish whether R-513A is listed for your machine. If the label cannot be read, or the refrigerant status is unknown, say so instead of trying to inspect or open the system yourself. The buyer can review available information alongside the model, condition and site access. An offer is based on the equipment and project details, and the seller does not need to operate the chiller for testing.
What if information is missing?
You can contact the buyer even when some equipment details are unavailable. If you cannot identify the tonnage, refrigerant, operating condition or manufacturer, describe what is visible and send any safe photographs you have. The buyer can tell you which additional details would be helpful. Do not assume a refrigerant or a capacity from appearance alone. A tentative description should stay clearly marked as tentative.
Start with the equipment identification
A readable nameplate can give a buyer a useful starting point. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. Existing equipment schedules can supplement a plate photograph. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Separate observations from assumptions
A seller can distinguish a known fact from an unverified assumption. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. Explain which information comes from an existing record and which comes from observation. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Define what the sale includes
Clarify the proposed scope before comparing an offer. The sale may concern one complete machine, several units, or equipment with certain components already missing. Note nearby controls, piping or other items only to explain whether they are included or remain with the building. A simple list can prevent mistaken assumptions. The final scope and conditions should be confirmed with the buyer for the particular project.
Describe condition without running the unit
Explain what you know about the machine’s condition. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. A gap in the service history does not need to be filled with a guess. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Include refrigerant in the removal conversation
A nameplate or existing record may help establish what refrigerant a particular chiller uses. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. The relevant records can be reviewed before a project is scheduled. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Consider loading and freight together
The loading area can be just as important as the room containing the chiller. Tell the buyer about available vehicle access, loading areas, turning space and any known site restrictions. A photograph can show features that are difficult to describe over the phone. The buyer handles and pays for loading and freight. Actual arrangements depend on the equipment, access and agreed scope; do not assume a specific vehicle or timetable.
Understand the buyer-handled removal scope
The equipment purchase includes a discussion of how the machine will leave the site. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller is not expected to run or test the machine. Any site-specific schedule and transaction terms should be agreed before proceeding.
Questions to ask before accepting an offer
Comparing offers requires a clear understanding of what each proposal includes. Ask which machine and related items are included, how upfront payment is arranged, and who handles recovery, disconnect, lifting, loading and transportation. For this buyer, those removal items are handled and paid for by the buyer. Discuss any site restrictions that may affect scheduling. Final arrangements depend on the actual equipment and agreed terms.
What information supports an offer?
The condition of the chiller is only one part of the conversation. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Estimates should be clearly labeled as estimates. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

