This page concerns selling a chiller associated with R-22 in North Carolina, not selling refrigerant as a separate product. The actual refrigerant must be identified from the particular unit or its records when possible; do not assume the charge from a manufacturer name or the appearance of the machine. The buyer handles and pays for refrigerant recovery as part of the equipment purchase and removal.
A clear photograph of the equipment label can help establish whether R-22 is listed for your machine. If the label cannot be read, or the refrigerant status is unknown, say so instead of trying to inspect or open the system yourself. The buyer can review available information alongside the model, condition and site access. An offer is based on the equipment and project details, and the seller does not need to operate the chiller for testing.
What if information is missing?
Missing information is a reason to explain the gap, not to make up an answer. If you cannot identify the tonnage, refrigerant, operating condition or manufacturer, describe what is visible and send any safe photographs you have. Follow-up questions can focus on the information that actually matters to the proposed sale. Do not assume a refrigerant or a capacity from appearance alone. A tentative description should stay clearly marked as tentative.
Start with the equipment identification
A useful first step is a clear picture of the manufacturer’s plate. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. A number copied from paperwork is helpful too. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Separate observations from assumptions
Good equipment descriptions make uncertainty visible. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. A short note beside each uncertain detail is enough. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Define what the sale includes
Clarify the proposed scope before comparing an offer. The sale may concern one complete machine, several units, or equipment with certain components already missing. Note nearby controls, piping or other items only to explain whether they are included or remain with the building. A picture with a short explanation can be enough to start. The final scope and conditions should be confirmed with the buyer for the particular project.
Describe condition without running the unit
Explain what you know about the machine’s condition. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. If you do not know why it stopped, say that plainly. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Understand the buyer-handled removal scope
Selling an industrial chiller involves both the asset and the practical removal. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller does not have to demonstrate operation. Any site-specific schedule and transaction terms should be agreed before proceeding.
Consider loading and freight together
A chiller also needs a practical path from its location to freight loading. Tell the buyer about available vehicle access, loading areas, turning space and any known site restrictions. A photograph can show features that are difficult to describe over the phone. The buyer coordinates and pays for loading and freight. Actual arrangements depend on the equipment, access and agreed scope; do not assume a specific vehicle or timetable.
Include refrigerant in the removal conversation
Do not infer a chiller’s refrigerant solely from its appearance or brand. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. The relevant records can be reviewed before a project is scheduled. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Prepare for a clear handoff
A clear handoff identifies both the equipment and the site contact. Review the agreed access arrangements, schedule constraints and boundaries of the sale. If any equipment details change, tell the buyer before the planned work. A shared equipment list can help distinguish the unit being sold from adjacent machinery. The buyer handles and pays for the agreed recovery, disconnect, crane, rigging, loading and freight.
What information supports an offer?
A buyer needs context about both the machine and its removal. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Unknown details should be identified as unknown. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

