This page concerns selling a chiller associated with R-123 in North Carolina, not selling refrigerant as a separate product. The actual refrigerant must be identified from the particular unit or its records when possible; do not assume the charge from a manufacturer name or the appearance of the machine. The buyer handles and pays for refrigerant recovery as part of the equipment purchase and removal.
A clear photograph of the equipment label can help establish whether R-123 is listed for your machine. If the label cannot be read, or the refrigerant status is unknown, say so instead of trying to inspect or open the system yourself. The buyer can review available information alongside the model, condition and site access. An offer is based on the equipment and project details, and the seller does not need to operate the chiller for testing.
Start with the equipment identification
Begin by photographing the equipment identification plate. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. Existing equipment schedules can supplement a plate photograph. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
What if information is missing?
You can contact the buyer even when some equipment details are unavailable. If you cannot identify the tonnage, refrigerant, operating condition or manufacturer, describe what is visible and send any safe photographs you have. The scope of the discussion can be adjusted once more is known. Do not assume a refrigerant or a capacity from appearance alone. A tentative description should stay clearly marked as tentative.
Describe condition without running the unit
Describe the equipment’s known condition in ordinary language. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. It is equally acceptable to say that the operating history is unknown. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Separate observations from assumptions
A seller can distinguish a known fact from an unverified assumption. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. Share those distinctions plainly. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Describe where the equipment sits
A clear description of the equipment location helps frame the removal discussion. Explain whether it is indoors, outdoors, on a roof or in a lower-level mechanical space. Mention obstructions, narrow paths and any nearby equipment that must remain. A straight-line distance does not necessarily describe the route out. The buyer can use this information to discuss the practical scope of the disconnect, lift, loading and freight.
Account for people and systems that remain
An occupied building requires a clear description of what will stay in use. Mention public areas, shared corridors, nearby equipment and any access restrictions that apply. A facility contact can identify site-specific rules and the people who need to approve the release of the equipment. The buyer can then discuss the removal scope with those details in mind. The seller does not need to test or dismantle the chiller before reaching out.
Flag connections to systems that remain
The boundaries between the chiller and the rest of the facility matter. Piping, electrical equipment, controls and adjacent machinery may be involved in a particular installation. A photograph or marked-up facility drawing can help explain which equipment is being sold and what must remain. Disconnect work is part of the buyer-handled removal scope. Do not attempt electrical or refrigerant work yourself to prepare the unit for sale.
Include refrigerant in the removal conversation
A nameplate or existing record may help establish what refrigerant a particular chiller uses. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. The relevant records can be reviewed before a project is scheduled. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Understand the buyer-handled removal scope
Selling an industrial chiller involves both the asset and the practical removal. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller does not have to demonstrate operation. Any site-specific schedule and transaction terms should be agreed before proceeding.
What information supports an offer?
A buyer needs context about both the machine and its removal. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. If some information is missing, explain what you do know. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

