A 175-ton chiller is described by cooling capacity, not by its lifting weight. If your North Carolina equipment is in this capacity range, share the exact rating shown on the nameplate or in an existing equipment schedule when available. A readable label, a general view of the machine and a description of the access route are a practical starting point for a buyer offer.
The 175-ton rating alone does not establish the machine’s size, refrigerant, operating condition or method of removal. Tell the buyer which information is confirmed and which is uncertain. The buyer purchases industrial chillers, handles and pays for recovery, disconnect, crane, rigging, loading and freight, and offers upfront payment. The seller does not need to start or test the unit to begin a conversation.
Start with the equipment identification
Begin by photographing the equipment identification plate. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. A number copied from paperwork is helpful too. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Describe condition without running the unit
Describe the equipment’s known condition in ordinary language. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. It is equally acceptable to say that the operating history is unknown. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Separate observations from assumptions
Good equipment descriptions make uncertainty visible. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. Share those distinctions plainly. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Explain site access and working restrictions
Every site can have its own practical access requirements. Explain where vehicles can enter, who authorizes access and whether a route crosses occupied space. Mention any scheduling restrictions, security procedures or building management requirements that apply to the site. A constraint is useful information even when a solution has not been chosen. This information helps the buyer discuss crane, rigging, loading and freight without assuming that all sites are alike.
Coordinate the timing of the sale
A proposed release window is useful even if the exact date is undecided. A replacement, building closure or other work may affect access to the chiller. Identify dependencies and keep them separate from dates that are already approved. It also helps the buyer understand whether the unit is immediately available or part of a later phase. Confirm the actual timing with the buyer; do not assume a fixed turnaround.
Describe where the equipment sits
Tell the buyer how the machine relates to the building and its exits. Explain whether it is indoors, outdoors, on a roof or in a lower-level mechanical space. Mention obstructions, narrow paths and any nearby equipment that must remain. A straight-line distance does not necessarily describe the route out. The buyer can use this information to discuss the practical scope of the disconnect, lift, loading and freight.
Understand the buyer-handled removal scope
Selling an industrial chiller involves both the asset and the practical removal. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller is not expected to run or test the machine. Any site-specific schedule and transaction terms should be agreed before proceeding.
Account for elevated or roof-level equipment
Tell the buyer if the unit is above ground level or is reached through a restricted area. Safe photographs of the surrounding space, nearby obstructions and ground-level access can help establish the situation. Avoid assuming that a particular lift method will be suitable. The buyer handles and pays for the crane and rigging needed for the agreed removal. The plan must reflect the actual site.
Include refrigerant in the removal conversation
Do not infer a chiller’s refrigerant solely from its appearance or brand. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. The relevant records can be reviewed before a project is scheduled. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
What information supports an offer?
A buyer needs context about both the machine and its removal. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Unknown details should be identified as unknown. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

