A 120-ton chiller is described by cooling capacity, not by its lifting weight. If your North Carolina equipment is in this capacity range, share the exact rating shown on the nameplate or in an existing equipment schedule when available. A readable label, a general view of the machine and a description of the access route are a practical starting point for a buyer offer.
The 120-ton rating alone does not establish the machine’s size, refrigerant, operating condition or method of removal. Tell the buyer which information is confirmed and which is uncertain. The buyer purchases industrial chillers, handles and pays for recovery, disconnect, crane, rigging, loading and freight, and offers upfront payment. The seller does not need to start or test the unit to begin a conversation.
Start with the equipment identification
Begin by photographing the equipment identification plate. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. Existing equipment schedules can supplement a plate photograph. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
What if information is missing?
An incomplete file does not prevent an initial conversation. If you cannot identify the tonnage, refrigerant, operating condition or manufacturer, describe what is visible and send any safe photographs you have. Follow-up questions can focus on the information that actually matters to the proposed sale. Do not assume a refrigerant or a capacity from appearance alone. A tentative description should stay clearly marked as tentative.
Separate observations from assumptions
Good equipment descriptions make uncertainty visible. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. A short note beside each uncertain detail is enough. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Describe condition without running the unit
Explain what you know about the machine’s condition. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. If you do not know why it stopped, say that plainly. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Describe where the equipment sits
The chiller’s location matters as much as its label when planning removal. Explain whether it is indoors, outdoors, on a roof or in a lower-level mechanical space. Mention obstructions, narrow paths and any nearby equipment that must remain. Access for a person is not necessarily access for a large machine. The buyer can use this information to discuss the practical scope of the disconnect, lift, loading and freight.
Account for people and systems that remain
An occupied building requires a clear description of what will stay in use. Mention public areas, shared corridors, nearby equipment and any access restrictions that apply. A facility contact can identify site-specific rules and the people who need to approve the release of the equipment. The actual removal sequence should be agreed for the particular site. The seller does not need to test or dismantle the chiller before reaching out.
Understand the buyer-handled removal scope
The equipment purchase includes a discussion of how the machine will leave the site. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. No seller startup or testing is needed. Any site-specific schedule and transaction terms should be agreed before proceeding.
Account for elevated or roof-level equipment
An elevated installation introduces access questions that are different from a ground-level pickup. Safe photographs of the surrounding space, nearby obstructions and ground-level access can help establish the situation. Avoid assuming that a particular lift method will be suitable. The buyer pays for crane and rigging as part of the purchase and removal scope. The plan must reflect the actual site.
Include refrigerant in the removal conversation
Do not infer a chiller’s refrigerant solely from its appearance or brand. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. Flagging the information early helps avoid assumptions during planning. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
What information supports an offer?
The condition of the chiller is only one part of the conversation. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Unknown details should be identified as unknown. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

