A 100-ton chiller is described by cooling capacity, not by its lifting weight. If your North Carolina equipment is in this capacity range, share the exact rating shown on the nameplate or in an existing equipment schedule when available. A readable label, a general view of the machine and a description of the access route are a practical starting point for a buyer offer.
The 100-ton rating alone does not establish the machine’s size, refrigerant, operating condition or method of removal. Tell the buyer which information is confirmed and which is uncertain. The buyer purchases industrial chillers, handles and pays for recovery, disconnect, crane, rigging, loading and freight, and offers upfront payment. The seller does not need to start or test the unit to begin a conversation.
Start with the equipment identification
A useful first step is a clear picture of the manufacturer’s plate. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. Existing equipment schedules can supplement a plate photograph. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Describe condition without running the unit
Describe the equipment’s known condition in ordinary language. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. It is equally acceptable to say that the operating history is unknown. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Separate observations from assumptions
There is no need to fill every gap in an old equipment file. For example, you may know when a machine was taken out of service without knowing its present operating condition. You may have an older equipment list but no current reading of the nameplate. Explain which information comes from an existing record and which comes from observation. The buyer does not require the seller to start or test the machine and can discuss an offer using the available information.
Account for elevated or roof-level equipment
An elevated installation introduces access questions that are different from a ground-level pickup. Safe photographs of the surrounding space, nearby obstructions and ground-level access can help establish the situation. Avoid assuming that a particular lift method will be suitable. The buyer handles and pays for the crane and rigging needed for the agreed removal. The plan must reflect the actual site.
Include refrigerant in the removal conversation
Do not infer a chiller’s refrigerant solely from its appearance or brand. If the type or status is unknown, tell the buyer that it is unknown. The buyer handles and pays for refrigerant recovery as part of the equipment removal. Recovery should be discussed along with the rest of the removal scope. EPA explains disposal requirements for chillers in its stationary refrigeration guidance.
Understand the buyer-handled removal scope
Selling an industrial chiller involves both the asset and the practical removal. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller does not have to demonstrate operation. Any site-specific schedule and transaction terms should be agreed before proceeding.
Consider loading and freight together
The loading area can be just as important as the room containing the chiller. Tell the buyer about available vehicle access, loading areas, turning space and any known site restrictions. A photograph can show features that are difficult to describe over the phone. The buyer handles and pays for loading and freight. Actual arrangements depend on the equipment, access and agreed scope; do not assume a specific vehicle or timetable.
Describe water-side connections when relevant
For a water-cooled unit, identify nearby piping and any shared systems. A general picture of the installation can help the buyer understand how the unit relates to the rest of the facility. Mention any equipment that needs to stay in place, and describe uncertainties without trying to disconnect anything. The scope should reflect the actual installation, not a presumed layout. The buyer handles and pays for the agreed removal work, including disconnect.
What information supports an offer?
A useful offer discussion brings together the equipment and the site. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Estimates should be clearly labeled as estimates. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Review the offer and payment terms
A useful comparison considers more than a headline offer. The buyer makes cash offers with upfront payment and handles and pays for refrigerant recovery, disconnect, crane, rigging, loading and freight. Ask for clarification if the timing or scope is not clear. An offer depends on the equipment and site details. The business is a buyer of chillers; it is not offering to sell you a replacement unit.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

