If you have a McQuay chiller to sell in North Carolina, identify the particular machine rather than relying on the manufacturer name alone. A nameplate photograph, model and capacity are useful when available; condition and the actual route out of the property are important too. This business buys industrial chillers and makes cash offers with upfront payment. The seller does not need to start or test the equipment.
The McQuay name by itself does not establish the unit’s refrigerant, components, weight, cooling method or condition. Equipment may vary, so describe what is on your machine and identify information you cannot verify. The sale is a direct discussion with a chiller buyer, not an offer to sell you replacement equipment, and no manufacturer affiliation is implied. Where access is constrained, photographs of the surrounding space help frame the removal conversation.
Start with the equipment identification
A readable nameplate can give a buyer a useful starting point. It may provide a manufacturer, model, serial number, rated capacity or refrigerant information, but the details shown differ by unit. Include the whole plate before taking a closer image of small lettering. Existing equipment schedules can supplement a plate photograph. If the plate is damaged or missing, say so rather than guessing. General views of the machine and any available records still give the buyer a way to begin the discussion.
Use records as context, not a substitute for the machine
Old service records may help distinguish similar units. Share what is available, including any information that identifies the equipment to be sold. If documents describe several machines, point out which entry may correspond to the unit. Records do not need to be complete before making contact. The buyer can review the information alongside photographs and ask follow-up questions about the machine and its location.
Take photographs that answer practical questions
Useful pictures show the machine as well as its surroundings. A view showing the complete unit helps separate the chiller from nearby equipment. A second set can show the identification plate, visible connections and any detached components that may be part of the sale. Include an overview of access restrictions if you can safely photograph them. Do not move equipment or open electrical enclosures to obtain photographs. If an area cannot be viewed safely, describe the limitation instead.
What if information is missing?
Missing information is a reason to explain the gap, not to make up an answer. If you cannot identify the tonnage, refrigerant, operating condition or manufacturer, describe what is visible and send any safe photographs you have. The scope of the discussion can be adjusted once more is known. Do not assume a refrigerant or a capacity from appearance alone. A tentative description should stay clearly marked as tentative.
Describe condition without running the unit
Describe the equipment’s known condition in ordinary language. You might know that a chiller was shut down during a replacement project, that it has been idle, or that certain pieces were removed. Those are examples, not requirements. A gap in the service history does not need to be filled with a guess. The seller does not need to test, start, repair or demonstrate the chiller. The buyer can consider the information supplied and discuss an offer based on the actual circumstances.
Define what the sale includes
A chiller sale is easier to discuss when both sides know the boundaries. The sale may concern one complete machine, several units, or equipment with certain components already missing. Note nearby controls, piping or other items only to explain whether they are included or remain with the building. A simple list can prevent mistaken assumptions. The final scope and conditions should be confirmed with the buyer for the particular project.
Think about the route out
Doors, corridors and turns are worth discussing before a removal date is set. Note visible restrictions such as low clearances, ramps, tight corners or obstructions. If you have reliable dimensions, share them; if not, say the measurements are not yet known. A drawing can supplement photographs of the path. The seller does not need to move or dismantle the chiller to obtain an initial offer discussion.
Understand the buyer-handled removal scope
The equipment purchase includes a discussion of how the machine will leave the site. This buyer handles and pays for refrigerant recovery, electrical disconnect, crane, rigging, loading and freight. Share details about the equipment location, access and any systems that remain so those tasks can be discussed for the particular site. The seller does not have to demonstrate operation. Any site-specific schedule and transaction terms should be agreed before proceeding.
Discuss lifting and rigging needs
Large equipment removal starts with the real access conditions, not a generic lift assumption. Explain where the machine sits, how much space is available and whether overhead or ground-level restrictions are visible. If a weight or drawing is available, share it; otherwise mark the information as unknown. Crane and rigging costs are handled by the buyer in connection with the purchase. The specific plan is determined for the equipment and site.
What information supports an offer?
A buyer needs context about both the machine and its removal. Share the manufacturer, model, capacity, condition and refrigerant type if known, along with photographs of the equipment and its access route. Mention whether other items are included and when the unit can be released. Estimates should be clearly labeled as estimates. The buyer can review the actual details and discuss a cash offer rather than treating every project as identical.
Request a chiller offer
To discuss your equipment, call (614) 715-3047 or email saleselectricalbuyers@gmail.com. Share whatever nameplate details, condition notes, location and access photographs are available. The buyer can review the information and discuss a cash offer with upfront payment and buyer-paid removal. You do not have to test or run the chiller before contacting the buyer.

